| 聯繫我們獲取報價 | 郵箱：mewoi@mewoi.com | Wechat：+8618620373879 |
產品簡介
技術參數
TECHNICAL SPECIFICATION
| Function | Measurement of AC current, high harmonic current, phase, power energy, power, power factor |
| Test mode | Clamp CT |
| Clamp Size | Φ68mm |
| Range | 0.0~2000A AC |
| Resolution | 0.1A |
| Accuracy | ±2.0%FS(50Hz/60Hz; 23°C±2°C, below 70%RH, keep the wire be in the center of clamp) |
| Coils Turn | Standard 2400:1(Customize is allowed) |
| Phase Error | ≤3°(50Hz/60Hz; 23°C±2°C) |
| Reference Load | RL:0~200mA≤2Kohm;0-20A≤20ohm; 0-2000A≤0.2ohm |
| Shielding layer | Clamp without shielding layer |
| Output Mode | Current induction output |
| Output Interface | φ3.5mm audio plug or Choose two root welding thread or standard multi-meter pen BNC plug |
| Output Wire Length | 2m |
| Electric Field Interference | About 0.3A when the external electric field 100A, 10mm nearby |
| Measured Wire Position | Approximately in the geometric center of the clamp |
| Current Frequency | 45H-60Hz(the frequency of current) |
| Frequency Feature | 40Hz~75kHz |
| Voltage of circuit | Below AC 600V |
| Dimension | 185mmx115mmx43mm |
| Weight | 530g |
| Working Environment | -20°C~50°C; below 80%rh |
| Storage Environment | -10°C~60°C; below 70%rh |
| Insulation Strength | AC 3700V/rms.(between coil and shell) |
| Safety Rules | IEC1010-1,IEC1010-2-032,Pollution degree:2 CAT III (600V) |
Sensor:1pc