MEWOI115-Clamp CT: 17*18mm,AC 0.00mA～5A/2mA,Clamp on Leakage current sensor meter，Current Transducer

MEWOI115-Clamp AC 0.01mA~100A Current sensor probe/meter/tester/pinza/alicate amperímetro

Email1：mewoi@mewoi.com

Whatsapp: +8618620373879

Ⅰ.INTRODUCTION

MEWOI115 High Accuracy Clamp leakage current sensor for AC leakage current, current, high harmonic current, phase, power, power factor and other detection. Range: 0.000mA～100.0A, jaw size is Φ16mm. The sensor adopts the clamp-shaped structure, which can be measured without disconnecting the measured circuit. The permalloy iron core and double-layer shielding technology are used to ensure the accuracy and stability of the measurement. Non-contact measurement methods are adopted, and the operation is safe and simple. It can be connected to phase detection analyzers, industrial control devices, data loggers, oscilloscopes, harmonic analyzers, power quality analyzers, and high-precision digital multimeters.

Technical Specifications

Function	Measurement of AC current, leakage current, high order harmonic current, phase, power energy, power, power factor
Test mode	Clamp CT
Clamp Size	17*18mm
Range	0.00mA～100A AC (5A,10A,30A optional)
Resolution	0.01mA AC
Accuracy	±2.0%FS(50Hz/60Hz; 23°C±2°C, below 70%RH, keep the wire be in the center of clamp)
Coils Turn	1:800
Phase Error	≤2°(50Hz/60Hz; 23°C±2°C)
Reference Load	RL:0~200mA≤300Ω; 0~2A≤30Ω; 0~20A≤3Ω;
Output Mode	Current induction output
Output Interface	φ3.5mm audio plug or Choose two root welding thread or standard multi-meter pen plugs
Output Wire Length	1.5m
Electric Field Interference	About 10mA when the external electric field 100A, 10mm nearby
Measured Wire Position	Approximately in the geometric center of the clamp
Frequency	45Hz~100kHz
Line Voltage	Below AC 600V
Weight	175g
Working Environment	-20°C-50°C; below 80%rh
Storage Environment	-10°C-60°C; below 70%rh
Insulation Strength	AC3700V/rms (between core and shell)
Safety Rules	IEC1010-1, IEC1010-2-032, Pollution degree 2, CAT III (600V)

Ⅱ.APPLICATION

MEWOI OEM/ODM Instruments Manufacturer

SELECTION GUIDE 1

Clamp on Current Sensor Probe For Terminals Such Mulitimeter&Oscilloscope

Click "Blue" marked Model No. to View the Spec

Model	Range	Resolution	Clamp Size	Power Supply&output	Hall effect	Current induction output,Direct Coil tap	Others
MEWOI107BE	0mA~60A (AC/DC)	1mA	Φ7mm	Power Supply: 9VDC, Output:10mV/A,100mV/A, Accuracy 3%	√		Suitable for small spaces AC / DC leakage current, low current test.
MEWOI108	0.0mA~30A (AC)	0.1mA, Accuracy 0.5%	Φ8 mm			√	Suitable for small spaces AC leakage current, harmonic, phase, Power test
MEWOI114	0.00mA～100A(AC)	0.01mA, Accuracy 1.0%	Φ14 mm			√	Suitable for small spaces AC leakage current, harmonic, phase, Power test
MEWOI115	0.00mA～100A	0.01mA	17mm×18mm			√	High accuracy AC leakage current
MEWOI116	0.00mA～20A (AC)	0.01mA,1%	Φ16mm			√	High accuracy AC leakage current
MEWOI130	0.000mA~60A (AC),	0.001mA,Accuracy: 1%	25*30mm			√	Double shielding, anti-jamming capability,suitable for leakage current,small current test.
MEWOI130E	0.00A~10A (DC),	0.01A	25*30mm	Power supply: 9VDC, output:0~2.5mV/10mA,Accuracy: 3%，Turns ratio：1:800			Double shielding, anti-jamming capability,suitable for small DC current test.
MEWOI130E2	0.0mA ~100mA (DC),	0.1mA	25*30mm	Power supply: 9VDC, output:0~2.5mV/1mA,Accuracy: 3%，Turns ratio：1:800			Double shielding, anti-jamming capability,suitable for DC leakage current test.
MEWOI130BE	0mA~60A (AC/DC)	1mA	25*30mm	Power supply: 9VDC, output:10mV/A，100mV/A,Accuracy: 2%	√		suitable for AC/DC current test
MEWOI135BE	0.0A~1000A (AC/DC)	0.1A	30*35mm	Power supply: 9VDC, output:1mV/1A,Accuracy: 2%	√		suitable for AC/DC current test
MEWOI140	0.00mA ~300A (AC) Turn Ratio 1:2400	0.01mA,Accuracy: 1%	35*40mm			√	Single shielding, suitable for leakage current, small current test
MEWOI140B	0.0A~600A (AC) Turn Ratio 1:4000	0.1A, Accuracy: 1%	35*40mm			√	suitable for big current test
MEWOI140C	0.0mA ~100A (AC) Turn Ratio 1:2000	0.1mA, Accuracy: 1%	35*40mm			√	suitable for current, harmonic, phase, Power test
MEWOI150	0mA ~ 600A AC	1mA,0.5%	Φ50mm
MEWOI168	0.00mA ~1000A (AC)	0.01mA, Accuracy: 1%	Φ68mm			√	Double shielding, anti-jamming capability,suitable for leakage current, current test
MEWOI168B	0.0A~2000A (AC)	0.1A, Accuracy: 2%	Φ68mm			√	suitable for current, harmonic, phase, Power test
MEWOI168C	0.00A~1000A (AC)	1mA, Accuracy: 2%	Φ68mm			√	suitable for current, harmonic, phase, Power test
MEWOI168BE	0.0A~2000A (DC), 0.0A~1000A(AC)	0.1mA	Φ68mm	Power supply: 9VDC, output:1mV/1A, Accuracy: 2%	√		suitable for AC/DC big current test
MEWOI170	0mA ~ 1000A	1mA	Φ70mm	output signal: mA/A;mV/A;1A;5A

SELECTION GUIDE 2

Flexible Coil Current Sensor Probe For Terminals Such as Mulitimeter&Oscilloscope

Click "Blue" marked Model No. to View the Spec

Model	Flexible CT	Range	Resolution	Coil length	Diameter	Application
MEWOI200G	Φ100 mm	AC 10mA~10000A~more	10mA	315mm (Can be customized)	φ7.5mm(suitable for narrow and cable-intensive places)	Measure AC big current, high harmonic currents, complex Waveforms current, inrush transient current. Suitable for measuring the size of a large or irregularly shaped conductor current
MEWOI300G	Φ200 mm	AC 10mA~10000A~more	10mA	630mm (Can be customized)	φ7.5mm(suitable for narrow and cable-intensive places)
MEWOI400G	Φ300 mm	AC 10mA~10000A~more	10mA	1000mm (Can be customized)	φ7.5mm(suitable for narrow and cable-intensive places)

Technical Specifications

Function	Measurement of AC current, leakage current, high order harmonic current, phase, power energy, power, power factor
Test mode	Clamp CT
Clamp Size	35mm×40mm
Range	0.0~600A AC
Resolution	0.1A AC
Accuracy	±1.0%FS(50Hz/60Hz; 23°C±2°C, below 70%RH, keep the wire be in the center of clamp)
Coils Turn	1:4000
Phase Error	≤3°(50Hz/60Hz; 23°C±2°C)
Reference Load	RL:0~300mA≤500Ω; 0~3A≤50Ω; 0~30A≤5Ω; 0~300A≤0.5Ω
Output Mode	Current induction output
Output Interface	φ3.5mm audio plug or Choose two root welding thread or standard multi-meter pen plugs
Output Wire Length	2m
Electric Field Interference	About 10mA when the external electric field 100A, 10mm nearby
Measured Wire Position	Approximately in the geometric center of the clamp
Current Frequency	45H-60Hz(when measuring big current)
Frequency Characteristics	10Hz~100kHz
Line Voltage	Below AC 600V
Dimension	120mm×70mm×33mm
Weight	190g
Working Environment	-20°C-50°C; below 80%rh
Storage Environment	-10°C-60°C; below 70%rh
Insulation Strength	AC3700V/rms (between core and shell)
Safety Rules	IEC1010-1, IEC1010-2-032, Pollution degree 2, CAT III (600V)

1*clamp meter,User Manual

ผลิตภัณฑ์

MEWOI115-Clamp CT: 17-18mm,AC 0.00mA～100A,Clamp on Leakage current sensor meter，Current Transducer