MEWOI107BE-Φ7mm,AC/DC 0mA-60.0A Clamp Current sensor probe/meter/tester/pinza/alicate amperímetro

Electricity Testing Instruments manufacturer, Support OEM/ODM, your testing specialist

Contact Us for QuotationEmail:mewoi@mewoi.comWhatsapp: +8618620373879

Ⅰ.INTRODUCTION

Click to download:  Selection Map

MEWOI107BE AC/DC Clamp Leakage Current Sensor is designed for measuring AC/DC current and leakage current under 600V line voltage, by adopting the latest CT technology and digital integrate technology. The small clamp is suitable for line densely places (electric power measurement system, the high speed rail system, car circuit overhaul, and so on), non-contact measurement, to ensure safe operation. It is small, with high precision, stable performance, can be connected with phase detection analyzer, industrial control equipment, data recorder, oscilloscope, electric power quality analyzer, high precision multi-meter. The sensor is widely applied in those fields as electricity, communications, meteorology, railroad, car industry, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments.

Ⅱ.TECHNICAL SPECIFICATION

 Function

Measurement of AC/DC current, leakage current

Power Supply

Zn-Mn dry battery, 6RL61, 9V. Continually using for 100 hours, connecting external power supply is also available for long time using.

Test Mode

Clip-on CT, non-contact measurement

Clamp Size

Φ7mm

Input Range

0mA-60.0A AC/DC

Output Voltage

10mV/A;100mV/A(corresponding)

Output Range

1V peak max

Resolution

1mA AC/DC

Accuracy

±3%FS(23°C±5°C, below 5%rh)

Phase Error

≤3°(AC 50Hz/60Hz; 23°C±2°C)

Calibration

Adjust ZERO to calibrate, eliminate external electric field interference

Output Wire

Core wire: signal positive output; shielding wire: signal ground

Lead length

2m

Dimension

LWH: 168mm×65mm×34mm

Frequency

AC: 45Hz-400Hz

DC: DC-100kHz

Test Position

Tested wire in the jaw center

Line Voltage

AC600V

Weight

170g (Including the battery)

Working Current

5mA

Working Temperature and Humidity

-10°C-50°C,below 80%rh

Limit Temperature Error

-10°C-0°C and 40°C-50°C, within 2%rdg

Storage Temperature and Humidity

-10°C-60°C,below 70%rh

Insulating Strength

AC3700V/rms (between the alloy of the clamp and the housing)

Applicable safety rules

IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Accessories

Sensor: 1piece; Battery(6F22,9V): 1piece; User Manual/Warranty card/ Certification: 1 copy

Ⅲ.STRUCTURE DRAWING

SELECTION GUIDE 1

Clamp on Current Sensor Probe For Terminals Such Mulitimeter&Oscilloscope 

Click "Blue" marked Model No. to View the Spec

ModelRangeResolution
Clamp SizePower Supply&output
Hall effectCurrent induction output,Direct Coil tap Others
MEWOI107BEMEWOI107BE_副本.8.jpg

0mA~60A

 (AC/DC)

1mA  Φ7mm    Power Supply: 9VDC, Output:10mV/A,100mV/A, Accuracy 3%
Suitable for small spaces AC / DC leakage current, low current test.
MEWOI108MEWOI108-1_副本_副本.80.jpg0.0mA~30A (AC)

0.1mA,

Accuracy 0.5% 

Φ8 mm 

Suitable for small spaces AC leakage current, harmonic, phase, Power test
MEWOI130MEWOI130.80.jpg0.000mA~60A (AC), 0.001mA,Accuracy: 1%25*30mm 

Double shielding, anti-jamming capability,suitable for leakage current,small current test.
MEWOI130EMEWOI130.80.jpg0.00A~10A (DC),  0.01A    25*30mm Power supply: 9VDC, output:0~2.5mV/10mA,Accuracy: 3%,Turns ratio:1:800 

Double shielding, anti-jamming capability,suitable for small DC current test.
MEWOI130E2MEWOI130.80.jpg

0.0mA

~100mA

 (DC), 

0.1mA      25*30mm Power supply: 9VDC, output:0~2.5mV/1mA,Accuracy: 3%,Turns ratio:1:800 

Double shielding, anti-jamming capability,suitable for DC leakage current test.
MEWOI130BEMEWOI130BE.0_副本80.jpg0mA~60A (AC/DC)    1mA25*30mmPower supply: 9VDC, output:10mV/A,100mV/A,Accuracy: 2%  
suitable for AC/DC current test
MEWOI135BEMEWOI135BE.80.jpg0.0A~1000A (AC/DC)    0.1A30*35mm     Power supply: 9VDC, output:1mV/1A,Accuracy: 2%   
suitable for AC/DC current test
MEWOI140MEWOI140_副本80.jpg

0.00mA

~300A

 (AC)  

Turn Ratio

1:2400

0.01mA,Accuracy: 1%   35*40mm  

Single shielding, suitable for leakage current, small current test
MEWOI140BMEWOI140_副本80.jpg

0.0A~600A (AC)


Turn Ratio

1:4000


0.1A,

Accuracy: 1% 

35*40mm 

suitable for big current test
MEWOI140CMEWOI140B_副本80.jpg

0.0mA

~100A

 (AC)

Turn Ratio

1:2000

0.1mA,

Accuracy: 1%

35*40mm

suitable for current, harmonic, phase, Power test
MEWOI168MEWOI068-1_副本80.jpg

0.00mA

~1000A 

(AC)       

0.01mA,

Accuracy: 1%       

Φ68mm 

Double shielding, anti-jamming capability,suitable for leakage current, current test
MEWOI168BMEWOI168.80.jpg0.0A~2000A (AC)

0.1A,

Accuracy: 2%

Φ68mm 

suitable for current, harmonic, phase, Power test
MEWOI168CMEWOI168.80.jpg0.00A~1000A (AC)

1mA,

Accuracy: 2% 

Φ68mm

suitable for current, harmonic, phase, Power test
MEWOI168BEMEWOI168BE-80.jpg

0.0A~2000A (DC),

0.0A~1000A(AC)

0.1mAΦ68mm

Power supply: 9VDC,

output:1mV/1A, 

Accuracy: 2%


suitable for AC/DC big current test

SELECTION GUIDE 2

Flexible Coil Current Sensor Probe For Terminals Such as Mulitimeter&Oscilloscope 

Click "Blue" marked Model No. to View the Spec

Model
Flexible CTRangeResolutionCoil lengthDiameterApplication
MEWOI200GMEWOI200G-80.jpgΦ100 mm

AC

10mA~10000A~more

10mA315mm (Can be customized)φ7.5mm(suitable for narrow and cable-intensive places)



Measure AC big current, high harmonic currents, complex Waveforms current,   inrush transient current.


Suitable for measuring the size of a large or irregularly shaped conductor current

MEWOI300GMEWOI300G-80.jpgΦ200 mm

AC

10mA~10000A~more

10mA630mm (Can be customized)φ7.5mm(suitable for narrow and cable-intensive places)
MEWOI400GMEWOI400G-80.jpgΦ300 mm

AC

10mA~10000A~more

10mA1000mm (Can be customized)φ7.5mm(suitable for narrow and cable-intensive places)

TECHNICAL SPECIFICATION

 Function

Measurement of AC/DC current, leakage current

Power Supply

Zn-Mn dry battery, 6RL61, 9V. Continually using for 100 hours, connecting external power supply is also available for long time using.

Test Mode

Clip-on CT, non-contact measurement

Clamp Size

Φ7mm

Input Range

0mA-60.0A AC/DC

Output Voltage

10mV/A;100mV/A(corresponding)

Output Range

1V peak max

Resolution

1mA AC/DC

Accuracy

±3%FS(23°C±5°C, below 5%rh)

Phase Error

≤3°(AC 50Hz/60Hz; 23°C±2°C)

Calibration

Adjust ZERO to calibrate, eliminate external electric field interference

Output Wire

Core wire: signal positive output; shielding wire: signal ground

Lead length

2m

Dimension

LWH: 168mm×65mm×34mm

Frequency

AC: 45Hz-400Hz

DC: DC-100kHz

Test Position

Tested wire in the jaw center

Line Voltage

AC600V

Weight

170g (Including the battery)

Working Current

5mA

Working Temperature and Humidity

-10°C-50°C,below 80%rh

Limit Temperature Error

-10°C-0°C and 40°C-50°C, within 2%rdg

Storage Temperature and Humidity

-10°C-60°C,below 70%rh

Insulating Strength

AC3700V/rms (between the alloy of the clamp and the housing)

Applicable safety rules

IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Accessories

Sensor: 1piece; Battery(6F22,9V): 1piece; User Manual/Warranty card/ Certification: 1 copy

Sensor: 1piece; Battery(6F22,9V): 1piece; User Manual/Warranty card/ Certification: 1 copy

Telephone
Product Center
Aftersales
QQ