Contact Us for QuotationEmail:mewoi@mewoi.comWhatsapp: +8618620373879

MEWOI9600 Leakage Protector Tester

MEWOI9600C Leakage Protector Tester is designed to test the line AC voltage, leakage initiating current, residual non-operating current and leakage initiating separation time of various leakage protectors online, the test current from 5~1000mA with 16 grade (5、10、15、20、30、40、50、60、100、150、200、250、300、500、600、1000mA), range of the leakage initiating separation time is 0~999ms, adopts 854X480 colorful touch LCD display, with battery power display, setting fault voltage indication, backlight brightness adjustment, internal wiring guidance diagram, convenient and direct-viewing, easy to operate. With high precision, small size, light weight, delicate appearance and easy to carry, the meter is an ideal tool for on-site or indoor detection of various leakage protectors.

MEWOI OEM/ODM  Instruments Manufacturer

TECHNICAL SPECIFICATION

Power Supply

7.4V, rechargeable lithium battery (full about 8.4V)

Test Line Voltage

Below AC 600V, in relay protection switch testing: below AC 250V

Rated Voltage

AC 220V

Leakage Current  Gears

(5、10、15、20、30、40、50、60、100、150、200、250、300、500、600、1000)mA

AC Voltage Gears

0~600V

Leakage Operating Time Range

0~999ms.

Leakage  Operating Time Accuracy

5%rgt±3%dgt

Gears Current Accuracy

±10%rgt±5dgt

Gears Voltage Accuracy

±2rgt%±3dgt

Failure Information Indication

LCD display “999” over time indication, it is possible that the rated initiating current grade of tested is too small or the leakage protector is faulty.

Test Wire Length

1.8M

Test Mode

Manual or automatic

Display Mode

LCD: 7 inches, TPT color touch screen

Meter Dimension

215mm×178mm×83mm

Battery Voltage

When the battery voltage lower than 7.0V, low battery voltage symbol display, and remind to replace the battery. The measurement value is also accurate at this time

Working Current

365mA Max

Working Temperature

-10℃-40℃, below 80%rh.

Storage Temperature

-10℃-60℃, below 70%rh.

Insulation Strength

≥100MΩ, AC 2kV/rms (between the shell and the screw).

Suitable Safety Standard

IEC1010-1, IEC1010-2-032, Pollution degree 2, CAT = 3 * ROMAN III(600V) IEC61326 (EMC standard).

SELECTION GUIDE

Model Leakage Current Gears Leakage OperatingTime RangeAC Voltage GearsCharge functionLCDRechargable Battery

MEWOI OEM/ODM  Instruments Manufacturer

MEWOI9600

15~500mA0~999msNoNo128*64No

MEWOI OEM/ODM  Instruments Manufacturer

MEWOI9600C

5~1000mA0~999ms0~600VYes5inch Color ScreenYes

MEWOI OEM/ODM  Instruments Manufacturer

MEWOI9600D

      10~500mA0~999ms0~250VYes             5inch Color ScreenYes


Telephone
Product Center
Aftersales
QQ