MEWOI-S1200+(New) Six phase relay protection test set, 6phase relay protection tester

MEWOI-S1200 Six phase relay protection test set, 6phase relay protection tester

  • Main Features:: 1.AC current source (6 * 30a),2. DC current source,3. AC voltage source,4. DC voltage source,5. switching value terminal
Contact Us for QuotationEmail:mewoi@mewoi.comWhatsapp: +8618620373879

MAIN FEATURES

1, Meet all test requirements on site.The instrument has standard six phase voltage and six phase current output. It can test not only traditional relays and protection devices, but also modern micro-computer protection devices, especially for transformer differential protection and standby automatic switching device. The test is more convenient and perfect.

2, All kinds of technical indexes fully meet the standard of DL / t624-1997 "technical conditions for microcomputer based test device of relay protection" issued by the Ministry of electric power.
3, Classic Windows XP operation interface, friendly man-machine interface, easy and fast operation; high performance embedded industrial control computer and 10.4 inch resolution 800 × 600 TFT true color display screen, can provide rich and intuitive information, including the current working state of the equipment and various help information.
4, This Windows XP system has its own recovery function to avoid system crash caused by illegal shutdown or misoperation.
5, Equipped with ultra-thin industrial keyboard and photoelectric mouse, it can complete all kinds of operations through keyboard or mouse just like ordinary PC.
6The main control board adopts DSP + FPGA structure and 16 bit DAC output. It can generate 2000 high density sine wave per week for fundamental wave, which greatly improves the quality of waveform and the accuracy of the tester.
7The high fidelity linear power amplifier ensures the accuracy of small current and the stability of large current.
8USB interface is used to communicate with PC directly without any connecting line, so it is convenient to use.
9. can be connected to laptop (optional) to run.Laptops and industrial computers use the same set of software, so there is no need to relearn the operation method.
10.It has the function of GPS synchronization test.The device can be built-in GPS synchronous card (optional) and connected with PC through RS232 port to realize synchronous test of two testers in different places.
11.Equipped with independent dedicated DC auxiliary voltage source output, the output voltage is 110V (1a), 220V (0.6A).It can be used for relays or protection devices that need DC power supply.
12.It has the function of software self calibration, which avoids opening the case to calibrate the accuracy by adjusting the potentiometer, thus greatly improving the stability of accuracy.

TECHNICAL SPECIFICATION

1.AC current source (6 * 30a)

Single phase current output (RMS)

0 -- 30A / phase, accuracy: 0.2% ± 5mA

six phase parallel output (RMS)

0 -- 180a / 6 same phase parallel output

Allowable working value of phase current for a long time (effective value)

10A

Maximum output power per phase

320VA

Maximum output power of six phase parallel current

1000VA

Six and the maximum output current allowed working time

5s

frequency range

0 -- 1000Hz, accuracy 0.001Hz

Harmonic number

2--20second

phase

0--360The accuracy is 0.1 degree


2. DC current source

DC current output

0--± 10A / phase, accuracy: 0.5% ± 5mA

3. AC voltage source

Single phase voltage output (RMS)

0 -- 125V / phase, accuracy: 0.2% ± 5mv

Line voltage output (RMS)

0--250V

Phase voltage / line voltage output power

75VA/100VA

frequency range

0 -- 1000Hz, accuracy: 0.001Hz

Harmonic number

2--20second

phase

0--360Degree, accuracy: 0.1 degree

4. DC voltage source

Single phase voltage output amplitude

0--± 150V, accuracy: 0.2% ± 5mv

Output amplitude of line voltage

0--±300V

Phase voltage / line voltage output power

90VA/180VA


5. switching value terminal

Switch input terminal

8Pairs

Air contact

1 -- 20 mA, 24 V, internal active output of the device

Potential reversal

Passive contact: low resistance short circuit signal

Active contact: 0-250V DC

Switch output terminal

4Yes, no contact, breaking capacity: 110V / 2a, 220V / 1a

6. others

time frame

1ms -- 9999s, measuring accuracy: 1ms

Volume and weight of single machine

Volume 390 x 280 x 170mm3, about 15kg

Power Supply

AC220V±10%,50Hz,10A


Telephone
E-mail
After Sales
QQ