| Contact Us for Quotation | Email：mewoi@mewoi.com | Whatsapp: +8618620373879 |
MEWOI130E2-DC 0.0mA -100mA Clamp on DC Leakage current sensor/tester/probe/detector/Interuptor
Ⅰ.INTRODUCTION GUIDE
Click to download: Selection Map
MEWOI130E2 Clamp DC Current Sensor use permalloy magnetic cores, with small size, high accuracy, good stability, strong anti-interference ability characteristics. It is applied with double shield technology, which insure strong anti-interference ability. MEWOI130E2 Clamp DC Current Sensor is widely applied in AC current leakage, current, power and energy measurement with high precision and small phase error of electricity, communications, meteorology, railway, oilfield, construction, measurement, scientific and research teaching unit, industrial and mining enterprises, which can be connected to a variety of high precision digital multi-meter and data recorder. |
Technical Specifications
| Function | Measurement of DC current, DC leakage current |
| Test mode | Clamp CT |
| Power Supply | 9V DC±1VDC |
| Rated Power | 20mA max |
| Clamp Size | 25mm×30mm |
| Range | 0.0mA -100mA DC |
| Resolution | 0.1mA DC |
| Accuracy | ±1.0%FS(23℃±2℃, below 70%RH, keep the wire be in the center of clamp) |
| Coils Turn | 1: 800 |
| Signal Output | 0~2.5mV/1mA |
| Output Interface | Red wire: positive power input; Yellow wire: ground; White wire: positive signal output |
| Output Wire Length | 2m |
| Geomagnetic interference | About 3mA |
| Measured Wire Position | Approximately in the geometric center of the clamp |
| Line Voltage | Under 600V DC measurement |
| Dimension | 115mm×70mm×33mm |
| Weight | 180g |
| Working Environment | -15℃-45℃; below 80%rh |
| Storage Environment | -10℃-60℃; below 70%rh |
| Insulation Strength | AC3700V/rms (between core and shell) |
| Safety Rules | IEC1010-1, IEC1010-2-032, Pollution degree 2, CAT Ⅲ(600V) |
Ⅱ.APPLICATION
SELECTION GUIDE 1
Clamp on Current Sensor Probe For Terminals Such Mulitimeter&Oscilloscope
Click "Blue" marked Model No. to View the Spec
| Model | Range | Resolution | Clamp Size | Power Supply&output | Hall effect | Current induction output,Direct Coil tap | Others |
MEWOI107BE | 0mA~60A (AC/DC) | 1mA | Φ7mm | Power Supply: 9VDC, Output:10mV/A,100mV/A, Accuracy 3% | √ | Suitable for small spaces AC / DC leakage current, low current test. | |
MEWOI108 | 0.0mA~30A (AC) | 0.1mA, Accuracy 0.5% | Φ8 mm | √ | Suitable for small spaces AC leakage current, harmonic, phase, Power test | ||
MEWOI130 | 0.000mA~60A (AC), | 0.001mA,Accuracy: 1% | 25*30mm | √ | Double shielding, anti-jamming capability,suitable for leakage current,small current test. | ||
MEWOI130E | 0.00A~10A (DC), | 0.01A | 25*30mm | Power supply: 9VDC, output:0~2.5mV/10mA,Accuracy: 3%，Turns ratio：1:800 | Double shielding, anti-jamming capability,suitable for small DC current test. | ||
| MEWOI130E2 | 0.0mA ~100mA (DC), | 0.1mA | 25*30mm | Power supply: 9VDC, output:0~2.5mV/1mA,Accuracy: 3%，Turns ratio：1:800 | Double shielding, anti-jamming capability,suitable for DC leakage current test. | ||
MEWOI130BE | 0mA~60A (AC/DC) | 1mA | 25*30mm | Power supply: 9VDC, output:10mV/A，100mV/A,Accuracy: 2% | √ | suitable for AC/DC current test | |
MEWOI135BE | 0.0A~1000A (AC/DC) | 0.1A | 30*35mm | Power supply: 9VDC, output:1mV/1A,Accuracy: 2% | √ | suitable for AC/DC current test | |
MEWOI140 | 0.00mA ~300A (AC) Turn Ratio 1:2400 | 0.01mA,Accuracy: 1% | 35*40mm | √ | Single shielding, suitable for leakage current, small current test | ||
| MEWOI140B | 0.0A~600A (AC) Turn Ratio 1:4000 | 0.1A, Accuracy: 1% | 35*40mm | √ | suitable for big current test | ||
MEWOI140C | 0.0mA ~100A (AC) Turn Ratio 1:2000 | 0.1mA, Accuracy: 1% | 35*40mm | √ | suitable for current, harmonic, phase, Power test | ||
MEWOI168 | 0.00mA ~1000A (AC) | 0.01mA, Accuracy: 1% | Φ68mm | √ | Double shielding, anti-jamming capability,suitable for leakage current, current test | ||
MEWOI168B | 0.0A~2000A (AC) | 0.1A, Accuracy: 2% | Φ68mm | √ | suitable for current, harmonic, phase, Power test | ||
MEWOI168C | 0.00A~1000A (AC) | 1mA, Accuracy: 2% | Φ68mm | √ | suitable for current, harmonic, phase, Power test | ||
MEWOI168BE | 0.0A~2000A (DC), 0.0A~1000A(AC) | 0.1mA | Φ68mm | Power supply: 9VDC, output:1mV/1A, Accuracy: 2% | √ | suitable for AC/DC big current test |
SELECTION GUIDE 2
Flexible Coil Current Sensor Probe For Terminals Such as Mulitimeter&Oscilloscope
Click "Blue" marked Model No. to View the Spec
| Model | Flexible CT | Range | Resolution | Coil length | Diameter | Application |
MEWOI200G | Φ100 mm | AC 10mA~10000A~more | 10mA | 315mm (Can be customized) | φ7.5mm(suitable for narrow and cable-intensive places) | Measure AC big current, high harmonic currents, complex Waveforms current, inrush transient current. Suitable for measuring the size of a large or irregularly shaped conductor current |
MEWOI300G | Φ200 mm | AC 10mA~10000A~more | 10mA | 630mm (Can be customized) | φ7.5mm(suitable for narrow and cable-intensive places) | |
MEWOI400G | Φ300 mm | AC 10mA~10000A~more | 10mA | 1000mm (Can be customized) | φ7.5mm(suitable for narrow and cable-intensive places) |
Technical Specifications
| Function | Measurement of DC current, DC leakage current |
| Test mode | Clamp CT |
| Power Supply | 9V DC±1VDC |
| Rated Power | 20mA max |
| Clamp Size | 25mm×30mm |
| Range | 0.0mA -100mA DC |
| Resolution | 0.1mA DC |
| Accuracy | ±1.0%FS(23℃±2℃, below 70%RH, keep the wire be in the center of clamp) |
| Coils Turn | 1: 800 |
| Signal Output | 0~2.5mV/1mA |
| Output Interface | Red wire: positive power input; Yellow wire: ground; White wire: positive signal output |
| Output Wire Length | 2m |
| Geomagnetic interference | About 3mA |
| Measured Wire Position | Approximately in the geometric center of the clamp |
| Line Voltage | Under 600V DC measurement |
| Dimension | 115mm×70mm×33mm |
| Weight | 180g |
| Working Environment | -15℃-45℃; below 80%rh |
| Storage Environment | -10℃-60℃; below 70%rh |
| Insulation Strength | AC3700V/rms (between core and shell) |
| Safety Rules | IEC1010-1, IEC1010-2-032, Pollution degree 2, CAT Ⅲ(600V) |
Meter*1pc