MEWOI-HLY200A.HLY100A 1-1999.9μΩ(100A/200A)DC low resistance tester/Contact resistance tester/Loop Resistance Tester

OEM/ODM instruments Manufacturer

  • Main Features:: 1,Low value resistance test:1-1999.9μΩ,2,200A(100A optional)
  • Model No.:: MEWOI-HLY200A
  • Name:: MEWOI-HLY200A DC low resistance tester

Contact Us for Quotation

Email1:billy.sz.china@gmail.com

Click to: Products MapEmail2: mewoi@mewoi.com
Whatsapp: +8618620373879

INTRODUCTION

Click to download:  MEWOI-HLY200A/100A Contact Resistance Tester User Manual

The good or bad of conductivity of breaker(hereinafter referred to as switch) conductive circuit, play an important role in guarantee the safety operation of switch. The conductivity performance can be reflected by the value of conductive circuit resistance. For this reason IEC standard and manufacturers all required testing the circuit resistance, and also have prescribed index for the circuit resistance of each kind switch. Before, normally use double bridge. But, because the voltage and current value are very small, when there are impurities between dynamic and static contact or the contact got surface oxidation, the dispersivity of test data is larger. At the same time, the anti-interference performance of bridge is not good, so the national standard requires that must test with DC more than 100A. The circuit resistance tester is a product developed by our company which in order to meet GB50150-2006 and DL/T 845.4-2004 regulations, and it was widely used in measurements of various switch’s contact resistance、circuit resistance, cable and wire、weld joint contact resistance.

MAIN FEATURES

1,The test current value is big, completely conform the national standard requirement which related to contact resistance test.
2,The test current was came from the 100A/200A high precision switch type constant current power supply, without manual adjust, the test is rapid and accurate.
3,Adopt four terminal connections; effectively eliminate the influence to the test result from resistance of test wire.
4,Test speed is fast, the USB interface can connect with PC, upload test data.
5,Working long hours, equipped with overheat protection circuit; the instrument is reliable and steady.
6,Easy and simple operation, light weight.

GENERAL SPECIFICATION

Test Current

Model No.

Test Current

MEWOI-HLY100A

50A,100A

MEWOI-HLY200A

50A,100A,150A,200A

Test Range


Model No.

Test Range

MEWOI-HLY100A

1-1999.9μΩ

MEWOI-HLY200A

1-1999.9μΩ

Resolution

0.01μΩ

Accuracy

1%±0.5μΩ

Power Supply

AC220V±10%  50Hz

Consumed power

MEWOI-HLY100A:≤500W,   MEWOI-HLY100A: ≤1000W

Operating Temperature

-20℃~40℃

Relative humidity

≤80%RH, non-condensate

Weight 

MEWOI-HLY100A:5KG, MEWOI-HLY200A:6KG

SELECTION GUIDE

Model

Current Range

Range of Resistance (Ω)

Resolution

MEWOI4700

MEWOI-clamp meter|earth ground resistance tester|pinza|接地电阻|curent sensor probe|电流传感器

≥2A

0.0001Ω~30.00kΩ

0.0001Ω

MEWOI4700C

MEWOI-clamp meter|earth ground resistance tester|pinza|接地电阻|curent sensor probe|电流传感器

≥2A

0.0001Ω~300.0Ω

0.0001Ω

MEWOI4700D

MEWOI-4700D.80.png

≥4A0.0001Ω~30.00kΩ0.0001Ω

MEWOI-HLY100A

MEWOI-HLY200A.HLY100A.80.jpg

50A,100A
1-1999.9μΩ1μΩ

MEWOI-HLY200A

MEWOI-HLY200A.HLY100A.80.jpg

50A,100A,150A,200A1-1999.9μΩ1μΩ

MEWOI4600

MEWOI-clamp meter|earth ground resistance tester|pinza|接地电阻|curent sensor probe|电流传感器

≥1A0.0010Ω~40.00Ω0.0001Ω
Telephone
E-mail
After Sales
QQ