MEWOI168BE-Φ68mm Clamp AC2000A,DC1000A Current sensor probe/meter/tester/pinza

Email：mewoi@mewoi.com

Whatsapp: +8618620373879

Ⅰ.INTRODUCTION

MEWOI168BE Clamp on AC/DC current Sensor is designed for testing AC/DC current with voltage under 600V on-line. Adopt the latest CT technology and digital integrated technology. There is not any metallic conductor outside the clamps, non-contact test to ensure save. It is small in size; high accuracy can connect with multi-meter, oscilloscope, electric power quality analyzer, etc. Widely applied in electricity, communication, meteorology, railway, oilfield, construction, measurement, scientific and research teaching unit, industrial and mining enterprises.

TECHNICAL SPECIFICATION

Function	Measurement of AC current, phase, power energy, power, power factor
Power supply	Zn-Mn dry battery 6F22 9VDC(external power is allowed)
Rated current	15mA
Test mode	Clamp CT, noncontact measurement
Clamp Size	Φ68mm
Range	DC 0.0~2000A; AC 0.0~1000A
Resolution	0.1A AC/DC
Signal output	1mV/1A
Accuracy	±2.0%FS(50Hz/60Hz; 23℃±2℃, below 70%RH, keep the wire be in the center of clamp)
Phase Error	≤3°(AC50Hz/60Hz; 23℃±2℃)
Zero clearing	Press ZERO key can clear the data, eliminate the effect of geomagnetic field to the measure of AC current
Output connection	Standard connection: Red wire-positive output; Yellow wire-negative output.
Output Wire Length	2m
Measured Wire Position	Approximately in the geometric center of the clamp, the errors for deviating the center of the clamp increase 1.5%rdg.
Frequency	AC 45Hz~400Hz
Voltage of circuit	Circuit with the voltage below AC 600V
Voltage of battery	When the voltage of battery is below 7.2V, the LED will be lighted when the voltage is low, indicate to replace the battery.
Dimension	224mm×115mm×43mm
Weight	515g
Working Environment	-15℃~45℃;80%rh below
Storage Environment	-10℃~60℃;70%rh below
Insulation Strength	AC 3700V/rms. (between core and shell)
Safety Rules	IEC1010-1,IEC1010-2-032,Pollution degree 2,CAT Ⅲ(600V)
Accessory	Sensor:1pc; battery(6F22 9V):1pc

SELECTION GUIDE 1

Flexible Coil Current Sensor Probe For Terminals Such as Mulitimeter&Oscilloscope

Click "Blue" marked Model No. to View the Spec

Model	Flexible CT	Range	Resolution	Coil length	Diameter	Application
MEWOI200G	Φ100 mm	AC 10mA~10000A~more	10mA	315mm (Can be customized)	φ7.5mm(suitable for narrow and cable-intensive places)	Measure AC big current, high harmonic currents, complex Waveforms current, inrush transient current. Suitable for measuring the size of a large or irregularly shaped conductor current
MEWOI300G	Φ200 mm	AC 10mA~10000A~more	10mA	630mm (Can be customized)	φ7.5mm(suitable for narrow and cable-intensive places)
MEWOI400G	Φ300 mm	AC 10mA~10000A~more	10mA	1000mm (Can be customized)	φ7.5mm(suitable for narrow and cable-intensive places)

1. Other Size Can be customized

Product Photo	Model	Coil Circle Diameter	Coil Length	Coil Weight	Coil Diameter
	MEWOI150GA	φ50mm	160mm	80g	φ7.5mm
	MEWOI200GA	φ100mm	320mm	90g
	MEWOI250GA	φ150mm	480mm	100g
	MEWOI300GA	φ200mm	640mm	110g
	MEWOI400GA	φ300mm	950mm	132g
	MEWOI600GA	φ500mm	1580mm	170g
	MEWOI2000GA	φ1000mm	3150mm	290g
	MEWOI2500GA	φ1500mm	4720mm	390g
	MEWOI300GB	φ200mm	640mm	212g	φ12mm
	MEWOI400GB	φ300mm	950mm	274g
	MEWOI600GB	φ500mm	1580mm	400g
	MEWOI2000GB	φ1000mm	3150mm	715g
	MEWOI3000GB	φ2000mm	6290mm	1340g
	MEWOI4000GB	φ3000mm	9420mm	1970g

Note: Coil length and interface can be customized according to request.

SELECTION GUIDE 2

Clamp on Current Sensor Probe For Terminals Such Mulitimeter&Oscilloscope

Click "Blue" marked Model No. to View the Spec

Model	Range	Resolution	Clamp Size	Power Supply&output	Hall effect	Current induction output,Direct Coil tap	Others
MEWOI107BE	0mA~60A (AC/DC)	1mA	Φ7mm	Power Supply: 9VDC, Output:10mV/A,100mV/A, Accuracy 3%	√		Suitable for small spaces AC / DC leakage current, low current test.
MEWOI108	0.0mA~30A (AC)	0.1mA, Accuracy 0.5%	Φ8 mm			√	Suitable for small spaces AC leakage current, harmonic, phase, Power test
MEWOI114	0.00mA～100A(AC)	0.01mA, Accuracy 1.0%	Φ14 mm			√	Suitable for small spaces AC leakage current, harmonic, phase, Power test
MEWOI115	0.00mA～100A	0.01mA	17mm×18mm			√	High accuracy AC leakage current
MEWOI116	0.00mA～20A (AC)	0.01mA,0.5%	Φ16mm			√	High accuracy AC leakage current
MEWOI130	0.00mA~30A (AC), 800:1	0.01mA,Accuracy: 0.5%	25*30mm			√	Double shielding, anti-jamming capability,suitable for leakage current,small current test.
MEWOI130E	0.00A~100mA (DC),	1mA	25*30mm	Power supply: 9VDC, output:25mV/1mA,Accuracy: 3%			Double shielding, anti-jamming capability,suitable for small DC current test.
MEWOI130E2	0.0mA ~100mA (DC),	0.1mA	25*30mm	Power supply: 9VDC, output:0~2.5mV/1mA,Accuracy: 3%，Turns ratio：1:800			Double shielding, anti-jamming capability,suitable for DC leakage current test.
MEWOI130BE	0mA~60A (AC/DC)	1mA	25*30mm	Power supply: 9VDC, output:10mV/A，100mV/A,Accuracy: 2%	√		suitable for AC/DC current test
MEWOI135BE	0.0A~1000A (AC/DC)	0.1A	30*35mm	Power supply: 9VDC, output:1mV/1A,Accuracy: 2%	√		suitable for AC/DC current test
MEWOI140	0.00mA ~40A (AC) Turn Ratio 800:1	0.01mA,Accuracy: 0.5%	35*40mm			√	Single shielding, suitable for leakage current, small current test
MEWOI140B	0.0A~600A (AC) Turn Ratio 1:4000	0.1A, Accuracy: 1%	35*40mm			√	suitable for big current test
MEWOI140C	0.0mA ~100A (AC) Turn Ratio 1:2000	0.1mA, Accuracy: 1%	35*40mm			√	suitable for current, harmonic, phase, Power test
MEWOI140E	DC 0mA～1000mA	1mA, Accuracy: 3%	35*40mm	Power supply: 9VDC, output:1mV/1mA,Accuracy: 3%
MEWOI150	0mA ~ 600A AC	1mA,0.5%	Φ50mm
MEWOI168	0.00mA ~60A (AC)	0.01mA, Accuracy: 0.5% 800：1	Φ68mm			√	Double shielding, anti-jamming capability,suitable for leakage current, current test
MEWOI168B	0.0A~800A (AC)	0.01A, Accuracy: 0.5% 2000：1 / 0～3V(7.5Ω)	Φ68mm			√	suitable for current, harmonic, phase, Power test
MEWOI168C	0.00A~1000A (AC)	1mA, Accuracy: 2%	Φ68mm			√	suitable for current, harmonic, phase, Power test
MEWOI168BE	0.0A~1500A (DC), 0.0A~1500A(AC)	0.1A	Φ68mm	Power supply: 9VDC, output:1mV/1A, Accuracy: 3%	√		suitable for AC/DC big current test
MEWOI170	0mA ~ 1000A	1mA	Φ70mm	output signal: mA/A;mV/A;1A;5A
MEWOI180	AC 0.00mA～60A	0.01mA 0.5% 800:1	80X80mm
MEWOI248	AC 0.0mA～100A	0.1mA 0.5% 800:1	108X148mm

TECHNICAL SPECIFICATION

Function	Measurement of AC current, phase, power energy, power, power factor
Power supply	Zn-Mn dry battery 6F22 9VDC(external power is allowed)
Rated current	15mA
Test mode	Clamp CT, noncontact measurement
Clamp Size	Φ68mm
Range	DC 0.0~2000A; AC 0.0~1000A
Resolution	0.1A AC/DC
Signal output	1mV/1A
Accuracy	±2.0%FS(50Hz/60Hz; 23℃±2℃, below 70%RH, keep the wire be in the center of clamp)
Phase Error	≤3°(AC50Hz/60Hz; 23℃±2℃)
Zero clearing	Press ZERO key can clear the data, eliminate the effect of geomagnetic field to the measure of AC current
Output connection	Standard connection: Red wire-positive output; Yellow wire-negative output.
Output Wire Length	2m
Measured Wire Position	Approximately in the geometric center of the clamp, the errors for deviating the center of the clamp increase 1.5%rdg.
Frequency	AC 45Hz~400Hz
Voltage of circuit	Circuit with the voltage below AC 600V
Voltage of battery	When the voltage of battery is below 7.2V, the LED will be lighted when the voltage is low, indicate to replace the battery.
Dimension	224mm×115mm×43mm
Weight	515g
Working Environment	-15℃~45℃;80%rh below
Storage Environment	-10℃~60℃;70%rh below
Insulation Strength	AC 3700V/rms. (between core and shell)
Safety Rules	IEC1010-1,IEC1010-2-032,Pollution degree 2,CAT Ⅲ(600V)
Accessory	Sensor:1pc; battery(6F22 9V):1pc

Sensor:1pc; battery(6F22 9V):1pc