• MEWOI-DRSL(DC)-2000mA  Split Core Leakage current sensor

MEWOI-DRSL(DC)-2000mA Split Core Leakage current sensor

  • Name:
    MEWOI-DRSL(DC)-2000mA Leakage current sensor
  • Model No.:
    MEWOI-DRSL(DC)-2000mA
  • Main Features:
    small DC leakage current measurement
Electricity Testing Instruments manufacturer, Support OEM/ODM, your testing specialist
share:

TECHNICIAL SPECIFICATION

Click to download:MEWOI-DRSL(DC)-2000mA Specification

Model NumberMEWOI-DRSL-2000mA
Diameter
φ33mm
Rated input Current (IPN)5010050010002000mA(AC)
Primary Current Measure range(IP)0~±1000~±1500~±6000~±12000~±2200mA
Rated output voltage of secondary sideDC ±5V, 4-20mA, 0-20mA (±1%)V
Power Supply Voltage (VCC)DC ±12V~±15V  (±5%)V
Current consumption<20 (VCC=±12V)mA
Galvanic isolation (Vd)2.5KV /50Hz/1min
Linearity (εL)<1%FS
Offset Voltage V0<±50 (TA=25℃)  mV
Offset Voltage drift VOT<±2.5( IP=0  TA =-10~+60℃)mV/℃
Operating temperature TA-10~+60
Storage temperature TS-20~+70
Load resistance RL≥10KΩ

blob.png

Matters needing attention:

  • The wrong connection may cause sensor damage. After the sensor is energized, the same phase voltage is measured at the output when the current wire cross the sensor center according the direction arrow indicating label.

  • The output range of the sensor can be adjusted according to the user's needs.

  • During the installation process, before closing the jaw, make sure the connecting interface is aligned, not forcibly closed

Selection Guide

Model NumberRangeDiameterOutputPower Supply

MEWOI-DRS4A.80.jpg

MEWOI-DRS4A

1000mA20mm5(DC)or5(AC) (±1%)±12V or+24V (5%)

MEWOI DSR5.80.jpg

MEWOI-DRS5

1000mA20mm5(DC)or5(AC) (±1%)±12V or+24V (5%)

MEWOI-DRSL.80.jpg

MEWOI-DRSL2000

2000mA33mmDC ±5V, 4-20mA, 0-20mA (±1%)DC ±12V~±15V  (±5%)

MEWOI-DRSL.80.jpg

MEWOI-DRSL100

100mA33mmDC±5V(±1%)DC±12V (±5%)

MEWOI-DRST(DC)-200mA_80.jpg

MEWOI DRST

2000mA19mmDC ±5V, 4-20mA, 0-20mA (±1%)DC ±12V~±15V  (±5%)


TAG:   leakage current sensor leakage current transformer

You may like