MEWOI1310B Large Caliber Wireless H/L Voltage Clamp Current Meter,High Voltage U-Type Current Meter

MEWOI OEM/ODM Testing Instruments Manufacturer

  • Main Features:: 1. High voltage AC current measurement, low voltage AC current and online AC current monitoring 2. MeasurementRange :0.00A~9999A(50/60Hz automatic) 3. DataStorage:99 groups 4. Test Mode : Non-contact U-type CT, realizes the unimpeded measurement 5. CT Size : Ф68mm
  • Model No.:: MEWOI1310B
  • Name:: High Voltage U-Type Current Meter
Contact Us for QuotationEmail:mewoi@mewoi.comWhatsapp: +8618620373879

Click to Download:MEWOI1310B User Manual

MEWOI1310B Large Caliber Wireless H/L Voltage Clamp Current Meter,High Voltage U-Type Current Meter

INTRODUCTION

       MEWOI1310B Large Caliber Wireless H/L Voltage U-Type Current Meter break through the traditional structure, specially designed and manufactured for measuring high voltage current, the unique u-type opening structure realizes the unimpeded measurement, and the field test is very convenient. The meter is composed of special large-caliber U-type ammeter with high-voltage insulation rod, equipped with wireless receiver, which can receive measured data within 100 meters straight, current range: AC 0.00A-9999A. For low voltage lines below 600V, the line current can be measured directly by hook meter without insulation rod.

       MEWOI1310B Large Caliber Wireless H/L Voltage U-Type Current Meteris used for current measurement of high voltage circuit below 550kV (should connect insulation rod to use).  Below 600V circuit no need the insulation rod, and use the u-type current meter to measure directly.The meter has data hold and data storage function. Insulation rod is equipped with adjustable interface, u-type clamp the measured wire by insulation rod is very convenient, save time and faster. Widely used in substation, power plant, industrial and mining enterprises, detection stations, electrical maintenance departments for current detection and field electrical work etc.

       It can also replace the H/L voltage turns ratio tester, which can measure the H/L voltage current of the primary circuit and secondary circuit respectively, and then calculate to get the H/L voltage turns ratio. Insulation rod is portable, with moisture-proof, high temperature resistance, impact resistance, bending resistance, high insulation, telescopic and other characteristics.

TECHNICAL SPECIFICATION

 Function High voltage AC current measurement, low voltage AC current and online AC current monitoring
 Power Supply 6V DC(LR03×4 alkaline dry batteries)
 Test Mode Non-contact U-type CT
 Transmission Mode 433MHz wireless transmission, transmission distance is about 100 meters
 Display Mode 4-digit LCD display, backlight function, suitable for measurement in dark place
 LCD Size 47mm×28.5mm
 Meter Size Detector:107mm×252mm×31mm
 Receiver:78mm×165mm×42mm
 CT Size Ф 68mm
 Insulation Rod Dimension Ф45mm, Contraction state: 1150mm; Stretched state: 5000mm.
 Insulation Rod Voltage Level 110KV
 Sampling Rate 2 times / second
 Measurement Range 0.00A~9999A(50/60Hz automatic)
 Resolution 0.01A
 Shift 0.00A~9999A automatic shift
 Test Accuracy±2%±5dgt (The wire is near the center of the bottom end of the U-type clamp,23℃±2℃)
 Position Error The measured conductor should be located as close as possible to the center of the bottom end of the U-type clamp.
 Data Storage 99 groups , in storage process “MEM” symbol display, “FULL” symbol flash display indicate storage is full
 Line Voltage Below 110kV current test , operate with insulation rods ( below 500kV can be customized)
 Data Hold In general test mode, press HOLD key to hold data, “HOLD” symbol display. press HOLD Key once again to cancel this function
 Data Access “MR” symbol display, it can look over all the stored data
 Overflow Display Exceed measurement range overflow function: “OL A” symbol display
 No Signal Indication When the receiver has not received transmit signal, dynamic display “no- -”symbol
 Automatic Shut Down 15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption
 Battery Voltage When battery voltage is lower than 4.8V±0.2V, low battery voltage symbol will display and remind to replace battery.
Meter Weight
 Detector: 235g; Receiver: 280g
 Meter total weight: 2300g
 Working Temperature -10℃ ~ 40℃; Below 80%Rh
 Store Environment ‘-10℃~60℃; Below 70%rh
 Interference Should try to avoid 315MHz, 433MHz same-frequency signal interference
 Insulation Strength AC 220kV/rms(The telescopic insulation rod is fully opened between the two ends)
 Structure Anti-Dripping Type II

SELECTION GUIDE

Model No.
NameRangeResolution
Insulation Rod lengthNote

MEWOI OEM/ODM  Instruments Manufacturer

MEWOI1310B

Large Caliber Wireless H/L Voltage U-Type Current MeterAC0.00A~9999A0.01mAФ48mm5mWireless Transmission

MEWOI OEM/ODM  Instruments Manufacturer

MEWOI1330B

Large Caliber Wireless H//L Voltage Hook Type Current Meter AC0.00A~9999A0.01mAФ128mm5mWireless Transmission




MEWOI OEM/ODM  Instruments Manufacturer

Telephone
E-mail
After Sales
QQ